TDi North EP3/DC5 Turbo kit


  • Product Description


      These comprehensive kits are of a very high standard and designed using top quality parts and materials.

      They have the potential to run up to and over 700bhp (turbo choice dependent) with supporting engine internal work.

      The kits are carefully designed so that everything on the car as standard, including heaters, air con (if fitted) all still work as from the factory.

      We are happy to run a good condition healthy 100% stock motor at 375-400bhp with no internal work necessary. We have had motors running upto 500bhp for over 12 months and no issues found but it’s not something we would recommend doing so if you’re looking to push higher than 400bhp we would recommend as a minimum up-rating the valves-springs and ideally fitting lower compression pistons and up-rated rods.

      The kit contains the following parts:

      • Stainless Steel Tubular Manifold with billet C.N.C. machined collector and V-band flanges
      • Borg Warner Custom S200SXE Turbocharger

        The 3.0” intake has been increased to 3.5” because it now has the anti-surge slots machined into it, the billet wheels that are the same as the much more expensive EFR range and the covers also have machined hole to run the EFR speed sensors. The large pad 360 thrust assemblies enable you to run higher boost pressure safely, spreading the load over a larger area.

      • Turbo oil feed kit.

      • Turbo oil drain kit.

      • Weld in sump oil return fitting - (sump removal and welding necessary)

      • Turbosmart Hypergate 45 Wastegate c/w optional lightweight spring
      • Turbosmart Race Port BOV c/w additional lightweight spring.
      • 2.5" Stainless downpipe with flexi section and 2x O2 sensor ports
      • Atmospheric dump pipe
      • Front mounted intercooler kit with support bar
      • Boost pipe hard-pipe kit from turbo to intercooler then intercooler to throttle body c/w integrated IAT sensor boss and BOV fitting
      • Intake pipe with HKS/K&N air filter and silicone joiner
      • Silicone joiner hoses and associated clamps
      • Rocker cover breather filter 
      • High speed IAT sensor and plug
      • DEI Firewall blanket 
      • Vacuum line and fittings for wastegate and BOV
      • Zircotec plasma coated manifold (reduces temps by 33%, as used on the F1 cars)
      • Rocker cover breather filter
      • High performance Turbo NGK spark plugs
      • Speedfactory 4 bar map sensor
      • Walbro uprated fuel pump 
      • Hondata boost controller

      Not included in the kit are the following items:

      • Catback/downpipe back exhaust system 
      • Mappable ECU/ K100 unit 

      Kits are available supplied and fitted only due to complexity. Turnaround time is normally 2-3 weeks.



  • Reviews

  • Product Details

Get the latest TDi North Updates

Sign up for the latest updates from the team at TDi about racing, tuning and competitions